FAQ's

Do we Deliver?

Yes. We deliver onsite to you, or building sites using a purpose-built fleet of trucks with all-terrain forklifts. We deliver to Brisbane, Sunshine Coast, Gold Coast, Lockyer Valley, and many other locations. We also deliver to freight depots for forwarding across Australia. We can also deliver large commercial loads across Queensland and interstate.

How do I work out how many pavers I need?

1. Measure the length and width of your area in metres.
2. Multiply to get the total area in m² (eg. 5 × 2 = 10 m²).
3. Check how many pavers are needed per m² for your chosen size (eg. 400 x 400mm pavers = 6.25 pavers per m2).
4. Multiply your area by that number (e.g. 10 × 6.25 = 62.5, round up to 63 pavers).

What is the difference between solid and extruded bricks?

• Solid bricks have no holes and can be used for building, paving, fireplaces, pizza ovens, fences, and mailboxes.

• Extruded bricks have holes and are used for building. Make sure you plan your layout so the holes are not visible in DIY projects.

Do I need to seal my pavers?

We recommend cleaning and sealing your pavers to keep them in good condition. These products are an investment in your home. Some low-cost brands of cleaners and sealers do not perform well. We sell one trusted brand that consistently delivers results. Contact us for advice on the best product for your project.

How do I clean efflorescence (white marks) from bricks and other building materials?

Use Barratec Brick and Masonry Cleaner, a green and safe non-corrosive organic acid proven effective in over 30,000 Australian projects, including the Calile Hotel in Brisbane.